Devlon™ is a cast polyamide* that is processed to our own unique in-house formulations. Each different grade has its own distinctive properties.

*Devlon™ A153 is an extremely high viscosity PA66 grade produced by extrusion.

Initially Devlon™ components are competitively priced and are often less expensive than the materials they replace. The greatest savings, however, are made by the increased life performance of the parts, protection of mating parts, decrease in service costs and reduction in downtime.

Copolymer and homopolymer acetals are very similar in many characteristics. However there are some differences – homopolymers tend to have better wear resistance and are better for use in applications with friction and wear problems. Copolymer materials possess better chemical resistance.

The long-term service temperature is defined as being the maximum temperature at which plastics can be kept in hot air for 10,000 and 20,000 hours without losing more than 50% of the initial values for their typical properties.

The short-term service temperatures are the short-term peak temperature values that the plastic can withstand for a period of minutes or sometimes even hours without the plastic being damaged, taking into account the load and its duration.

Yes. Like all thermoplastics, Devlon™ does absorb some moisture. This phenomenon is predictable and providing your parts are toleranced accordingly, they will operate problem-free in this environment.

Although not always necessary, dependant on speeds and loads, greasing or lubricating polymer materials is generally advantageous.

Devon is slow-burning and self-extinguishes after removal of the flame source. Devlon™ is UL 94 rated V2. The material has an oxygen index of 24.1 to 27.2 dependant on grade.

Yes. Devlon™ is resistant up to 10⁶ rads. Thereafter some surface degradation occurs which is seen as discolouration and surface cracking.