| Devlon™ T100 (Black) |
Proprietary cast material, which covers a wide range of applications. Inherently stress free with excellent wear properties, low friction and improved impact strength. Proven in a wide range of applications and industries. |
|
Typical Applications:
Bushings, sheaves, rollers, gears, wear pads, wire rope guides and washers.
|
| Devlon™ S Grade (Blue) |
Devlon™ S Grade has the highest molecular weight that provides superior mechanical properties. S Grade is well suited for larger sized components and provides optimum performance in rigorous and abrasive applications. S Grade Natural is approved for food grade applications.
|
|
Typical Applications:
Bushings, sheaves, rollers, gears, thrust washers, seal rings and large diameter bushings.
|
| Devlon™ V API (Yellow) |
Similar high performance levels as S grade, but has been specifically tailored for high temperature and pressure applications. Low moisture absorption improves dimensional stability. Particularly well suited for offshore applications where weight saving, non-corrosive and impact wear properties are imperative. |
|
Typical Applications:
Valve seat inserts, riser clamps, bundle spacers, rollers and large diameter bushings.
|
| Devlube (Red) |
A self-lubricating material ideally suited for dry running applications that require low friction and where lubrication is not possible. Improved wear characteristics means excellent retention of physical properties - coefficient of friction of 0.04 - 0.08 makes Devlube ideal for wide range of applications. |
|
Typical Applications:
Wear pads, cam guides, bearing blocks, conveyor components, drilling rig guides and horizontal wear pads.
|
| Devlon™ A153 (Yellow) |
Specially formulated high viscosity Nylon 66 resulting in superior wear characteristics. Improved impact strength and rigidity giving greater design reliability when strength, weight and size are critical. Significantly lower linear coefficient of thermal expansion than traditional Nylon 66, therefore maintaining dimensional tolerances and clearances more accurately in applications involving thermal cycling. Maximum operating temperature of 170°C. |
|
Typical Applications:
Journal bearings, thrust washers, bearing cages, rollers, piston seals and wear pads
|
Devlon™ A153/S
|
Specifically tailored to meet the demanding needs of the rail industry. A153/S is approved for both disc brake and tread or clasp brake applications. |
|
Typical Applications:
Brake rigging bushings, bolster wear pads, lateral plates, bell crank bushings and cross link bushings.
|
Devlon™ 6GF30
|
Devlon® 6GF30 is a cast Nylon 6 material containing 30% glass fibre filler by volume. The filler reinforcement provides the the material with outstanding creep resistance, greater structural strength and dimensional stability. |
|
Typical Applications:
Internal buckle arrestor in pipe-in-pipe systems, highly loaded bushes supporting slow pivoting action in agricultural, forestry and construction equipment.
|
|
